Doors and Panels
The frame is made of solid maple wood. The door fillers are made of 8 mm thick veneered wooden board, refined on both sides with maple veneer. The surfaces are varnished with transparent polyurethane varnish.
Boxes
The 16 mm thick wooden board is refined on both sides. The front edge is lined with 1 mm thick ABS lining tape in imitation maple, while the other edges are lined with maple melamine foil.
Decorative Elements
Glass is frosted, fixed with thin PVC linear element. Rest of the elements are made out of both side coated chipboard, 17 mm thick, covered with maple veneer. Visible edges are covered with 2 mm thick maple veneer, rest of the edges covered with melamine foil.
Handles
Metal handles. Distance between holes is 160 mm.
Kick Plate
PVC plinth aluminum color, 10 or 15 cm high. There is possibility of ordering aluminum frame instead of PVC plinth, 10 or 15 cm high. Attention: you can’t put fully integrated fridge or dishwasher on aluminum frame.
Drawers and pull out baskets
Drawer frame made of metal, painted in grey color, 100% pull out, soft closing. Base and back of drawer made of 16 mm chipboard in grey color. Pull out baskets made of metal, painted in grey color, soft closing.
Iron Parts
Swivelling clip hinges made of metal, nickel plated and fitted with pull springs, cross-head screws zinc galvanised. Holders made of a metal-polymer combination allow adjustment in high and depth. Under-counter elements mounted on polymer base legs 10 cm (15 cm) high, allowing height adjustment.
|
